7 Things to Know Before Buying a Furnace in Richmond

Buying a new furnace may not be a priority in the immediate future. But it’s wise to know the things that will likely influence your selection when you’re ready to buy. Here are seven things you’ll want to think about when it’s time for furnace replacement in Richmond.

1. Size and Installation Quality

To run at maximum efficiency and comfort, your furnace must be properly sized for your home. When it involves furnaces, bigger is certainly not better. We frequently get requests from customers to purchase a big furnace in the mistaken belief that a larger furnace is either more dependable or will offer better comfort.

The reverse is true. Large furnaces will short cycle, or continuously turn on and off. This leaves you cold, with more expensive energy bills and a furnace that could wear out much sooner.

This is why it’s important to work with the right company when buying a new furnace. Even if it’s the correct size but improperly installed, the U.S. Department of Energy says you could forfeit as much as 30% of your energy efficiency.

Another key component of installation is ductwork. If yours is old or designed wrong, you might have issues with sound or comfort. A furnace is only as effective as the duct system it’s attached to.

At Eveready Service Experts , our Expert HVAC technicians are ACE certified, which means they’re skilled in repairing and installing various kinds of home comfort systems. Besides technical skill, our technicians are also trained in treating you fairly. We also stand behind our work with a 100% satisfaction guarantee for a year.*

2. Energy Efficiency

Furnaces are rated by a term called AFUE, or annual fuel utilization efficiency. Like miles per gallon on cars, this measures the annual gas consumption of a furnace. The higher the number, the less gas is wasted during the heating process.

If your current furnace is 15 years old, it’s likely rated well below 80 AFUE. As an example, if your HVAC system is 70 AFUE, you’re throwing away up to 30 cents of each dollar you spend on heating.

Here’s how AFUE ratings work today:

  • 80 AFUE—minimum efficiency rating in the U.S. and Canada.
  • 90 AFUE—ENERGY STAR® rating for furnaces in the U.S. South.
  • 95 AFUE—ENERGY STAR® rating for furnaces in the U.S. North and Canada.
  • 98 AFUE—best efficiency rating available.

3. Blower Motor Technology

As you evaluate new furnaces there is one more important consideration: blower technology. This part circulates air throughout your home. And it also uses a lot of electricity, so it’s important to know about your options.

There are three kinds of blowers available on furnaces nowadays. They include:

  • Standard blower motor. Furnaces that aren’t ENERGY STAR rated have a standard blower motor that’s been mostly the same for the past 30 years. This motor is the least costly and also the least energy efficient.
  • Constant torque motor. This technology finds a balance between cost and energy efficiency. It delivers an electrical efficiency boost over a traditional motor design.
  • Variable-speed motor. The most energy-efficient furnaces can run at different speeds. Instead of running at full speed 24/7, they will quietly operate at a low or medium speed at times. This helps enhance your comfort while keeping energy costs low, both in the winter and summer. And it also keeps indoor humidity in check.

4. Sound Reduction Technology

Sound has become a very significant consideration with furnace installation, so another dramatic improvement has been noise management. Some of these features include:

  • Sealed and insulated cabinets
  • Variable-speed blower technology
  • Nearly silent gas burners

With this technology, you might not even notice that your furnace is running.

5. Smart Thermostat

You probably have a programmable thermostat, but it's quite possible you probably aren’t maximizing your energy savings. These thermostats can be complicated to program, particularly if your schedule varies from day to day.

A smart thermostat removes all the guesswork about energy efficiency. Many models can pick up on your temperature preferences and then create an energy-saving schedule to match. They also know when you’re home or away and will adjust your heating and cooling as needed.

As an extra perk, you’ll also be able to keep tabs on and change your settings from just about anyplace on your phone. Some models can even notify you if they detect a problem with your furnace or remind you when it’s time to change your air filter.

6. Warranty

There’s a major difference in furnace quality and reliability. Like any large purchase, we think it’s wisest to go with a major brand name. With a top brand like Lennox® or Goodman®, you’ll have more confidence in the technology and that the manufacturer will uphold its product warranty over the long term.

Furnaces typically have two primary warranty coverage areas:

  • Heat exchanger. This is the heart of the furnace and the most expensive component to replace. This part usually has a 20-year limited warranty or lifetime limited warranty, but this can differ based on the manufacturer and furnace model.
  • Main parts. This includes the blower motor, electronic controls, ignitors and other key parts. Warranties can vary from as short as a one-year limited warranty to as long as a 10-year limited warranty.

When reviewing warranty coverage, it’s important to know it's limited. So, you should make sure you understand the limitations. For example, nearly all standard manufacturer warranties only include the cost of the replacement part, not labor. And labor on a replacing heat exchanger could get very expensive.

Once your new furnace is installed, make sure you finish the product registration right away. Many manufacturers may limit the warranty term if the product registration is not done. This step is simple and usually only takes a few minutes.

7. Cost

How much does all this cost anyhow? It could range from $1,700 for a basic furnace, or $5,500 or more for a high-efficiency system.

As you think about these costs and the affect on your budget, remember that unlike nearly every other appliance you may need to purchase, your new furnace may help pay for itself from the monthly energy savings it offers.

A couple of other ways to save include:

  • Replacing your air conditioner at the same time.
  • Buying at the right time, such as in early fall, mid-winter and early spring. You may be able to get additional discounts and rebates during this slower season.
  • Reap the benefits of rebates from the federal and state government, as well as from your local utility provider. We can help you figure out this process.
  • Finance your new furnace or enroll in our exclusive HVAC Advantage Program™. For just one low monthly fee, you’ll receive a new furnace with repairs and maintenance included.*

How Do I Know When to Replace My Furnace?

Now that you know what to look for in a new furnace, when should you replace your outdated one? Here are a few ideas from our Experts that will help you make that decision.

Age

Heating systems typically last 15–20 years. How long yours will last depends on whether you’ve done furnace maintenance, where you live and your desired temperature. If you’re in a place with harsh winters, your furnace will operate more often, potentially making it wear out faster. The same applies if you like to keep your home at a warmer temperature.

Repair Frequency and Cost

Just like any appliance, as furnaces age, the likelihood for frequent furnace repair goes up. If your system is more than 15 years old, those repairs can be especially expensive. Common and costly repairs on an older furnace include:

  • Blower motor failures
  • Ignition control failures
  • Heat exchanger failures

If repairs are greater than the half the cost of a new furnace, it’s generally recommended to replace it.

Energy Efficiency

Furnaces older than 15 years can be extremely inefficient. You could be wasting as much as 30% of the money you spend to heat your home. Excessive energy costs and the desire to reduce energy consumption are also strong reasons to consider replacing your furnace. In fact, an independent study by Decision Analyst shows nearly 20% of homeowners who recently replaced their furnace specifically did so to reduce their energy bills.

Trust Your Furnace Replacement to the Experts

It can seem overwhelming trying to investigate furnace features on your own. Or know exactly when you should replace your furnace. Our Eveready Service Experts Experts are here to make the process much simpler. Contact us at 804-548-4480 or schedule an appointment online to request your free home comfort assessment today.


*For HVAC Service Memberships, certain warranty exclusions and limitations apply. See your signed agreement for full terms and conditions. For the Advantage Program™, please see your signed Advantage Program Agreement for full details and exclusions. Lease with approved credit; visit ServiceExperts.com for details.

Contact Us